Oil-Water Separation Filter Cartridge, Fine Filtration 3–5 µm, OD95 x ID48/14 Pleats x H1000mm, Stainless Steel End Caps, Double Mesh Layer
The oil-water separation filter cartridge is an essential component in industrial liquid filtration systems. It is designed to support the separation of water from oil, fuel, and hydrocarbon-based fluids while retaining fine contaminants at a 3–5 micron filtration level. With dimensions of OD95 x ID48/14 pleats x H1000mm, stainless steel end caps, and a double mesh reinforced structure, this product manufactured by DCF.vn is suitable for systems requiring high cleanliness, reliable durability, and stable operation in industrial environments.
DCF.vn is a Vietnam-based manufacturer and processor of industrial filtration products, providing replacement solutions based on standard dimensions and actual technical requirements. With in-house production capability, controlled material input, and flexible manufacturing based on application demands, DCF.vn supplies filter cartridges suitable for oil treatment systems, fuel filtration, and a wide range of industrial fluid applications.
Technical Specifications
-
Product name: Oil-water separation fine filter cartridge
-
Filtration rating: 3–5 µm
-
Outer diameter (OD): 95 mm
-
Inner diameter (ID): 48 mm / 14 pleats
-
Height (H): 1000 mm
-
End cap material: Stainless steel
-
Cartridge body structure: Double mesh reinforcement
-
Mesh material: Stainless steel mesh coated with PTFE/Teflon on both sides
-
Inner support core: Carbon steel or equivalent structure depending on production configuration
-
Reference water separation performance: High, supporting droplet blocking and stable oil flow
-
Reference initial pressure drop: Low, approximately 0.1–0.3 bar depending on flow rate and fluid viscosity
-
Operating flow rate: Depends on filter housing design and system conditions, suitable for industrial oil-water separation and fuel applications
-
Reference service life: Approximately 3,000–8,000 operating hours depending on contamination level, differential pressure, and service conditions
-
Reference operating temperature: Based on PTFE/Teflon material characteristics and actual system configuration
-
Reference standards: API-1581, GTB610-88
-
Application type: Oil-water separation, fine contaminant removal, equipment protection, and fluid cleanliness improvement
The values related to differential pressure, service life, separation efficiency, and applicable standards are presented based on an imported material configuration equivalent to the referenced separator cartridge line. Depending on flow rate, fluid viscosity, contamination level, and the actual filter housing configuration, these indicators may be adjusted to match specific operating conditions.
Filter Cartridge Construction
The cartridge is designed in a cylindrical form for installation in industrial oil-water separator housings and filtration assemblies. Stainless steel end caps provide structural rigidity, corrosion resistance, and stable performance in environments containing oil, water, or moisture. The double mesh reinforced structure helps protect the filter media, reduce deformation under differential pressure, and maintain mechanical stability throughout operation. With an imported material configuration equivalent to the referenced separator cartridge, the filter uses stainless steel mesh coated with PTFE/Teflon on both sides, providing hydrophobic properties that help prevent water droplets from passing through while maintaining smooth oil flow. The internal structure may include a protective mesh layer, a support mesh layer, and an inner core to improve durability and service life.
Operating Principle
As fluid passes through the cartridge, the fine filtration media captures contaminants in the 3–5 micron range while supporting the separation of water droplets from the oil phase. This process improves downstream fluid cleanliness and reduces the risk of water and impurities entering pumps, valves, burners, nozzles, or other critical equipment. Thanks to its robust construction and stable flow characteristics, the cartridge helps maintain system performance and reduce contamination-related failures.
Key Advantages
-
Efficient fine filtration at 3–5 µm for reduced particulate contamination in process fluids
-
Effective oil-water separation to improve fluid cleanliness before entering downstream systems
-
PTFE/Teflon-coated stainless steel mesh on both sides provides strong water repellency and improved separation performance
-
Stainless steel end caps offer durability and corrosion resistance in demanding industrial conditions
-
Double mesh design protects the filter media, improves mechanical stability, and supports performance under pressure differential
-
Standard dimensions OD95 x ID48/14 pleats x H1000mm allow convenient replacement and installation
-
Manufactured by DCF.vn using imported materials equivalent to the referenced cartridge line, suitable for applications requiring stable separation performance and long service life
Applications
This 3–5 µm oil-water separation filter cartridge is commonly used in industrial oil treatment systems, fuel filtration systems, hydraulic oil circuits, circulating oil systems, lubrication oil units, and pipeline filtration assemblies where both water contamination and fine particles must be controlled. It is suitable for mechanical plants, equipment maintenance workshops, fuel handling systems, storage tank areas, and production lines that require higher fluid cleanliness before operation or recirculation.
Selection and Usage Notes
-
Verify OD, ID, height, and end cap configuration carefully before replacement
-
Select the 3–5 µm filtration grade for systems requiring fine contaminant control
-
Monitor differential pressure, flow rate, and contamination level to determine the appropriate replacement interval
-
Install the cartridge in the correct position within the filter assembly to ensure optimal oil-water separation performance
-
For special requirements related to material, structure, or operating environment, custom manufacturing can be provided by DCF.vn based on actual technical specifications
Conclusion
The Oil-Water Separation Fine Filter Cartridge 3–5 µm, OD95 x ID48/14 pleats x H1000mm, with stainless steel end caps and double mesh structure, is a reliable solution for systems that require fine contaminant control and water separation from oil or fuel. With durable construction, imported filter materials, stable operating performance, and a design suitable for demanding industrial conditions, this cartridge helps improve fluid cleanliness, protect equipment, and optimize overall system efficiency.
Contact DCF.vn for consultation on suitable filtration solutions, standard-size replacement cartridges, or custom manufacturing based on technical requirements. Phone: 028-6270-2191. Address: 33 Street No. 17, Hiep Binh Ward, Thu Duc.
Nhóm chuyên viên tư vấn sản phẩm Đông Châu
KD1: 0909374589 - muahang@dongchau.net
KD2: 0901325489 - kinhdoanh@sanphamloc.com.vn
KD3: 0906893786 - dongchau8@dongchau.net
KD4: 0906882695 - hotrokhachhang@sanphamloc.com.vn
KD5: 0902490389 - baogia@sanphamloc.com.vn
KD6: 0938958295 - locbui@sanphamloc.com.vn
KD7: 0902703986 - dongchau9@dongchau.net
